Products by Category

 

Adhesion

Product Image Name Description Documents More
PosiTest PosiTest AT manual Adhesion Tester (Defelsko) Measures adhesion of coatings to metal, wood, concrete and other rigid substrates Revolutionary self-alignment feature and pull rate indicator. Conforms to national and international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others. Now available in 2 models... Manual or Automatic Download PDF  
PosiTest Automatic PosiTest Automatic Adhesion Tester Measures adhesion of coatings to metal, wood, concrete and other rigid substrates Revolutionary self-alignment feature and pull rate indicator. Conforms to national and international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others. Download PDF  
TQC 1000 CC1000 Cross Cut Adhesion testers by TQC The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Download PDF Link to TQC
CC2000 CC2000

The TQC CC2000 Cross Cut Adhesion Test KIT is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting knife of the TQC Cross Cut Adhesion Test CC2000 is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test CC2000 ensures equal pressure on the cutting knife.

Download PDF Link to TQC
CC3000 CC3000

The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.

Download PDF Link to TQC
SP3000 SP3000 masterapaint plate The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, wet film thickness gauge from 50 up to 160 microns, edge grind checker for correct roundess of edges, wet film apllicator ranging from 0 to 180 µm as well as levelling test providing an indication of the viscosity of the coating. Delivery includes cutting tool and tape. Download PDF Link to TQC
SP3007 and SP3010
TAPE FOR ADHESION TEST (ISO 2409:2003)
The TQC Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit CC2000, Cross Cut Adhesion Test Kit CC3000, Basic Inspektion Kit, Master Paint Plate, Adhesion Test Kit and SuperPIG. Download Data sheet Link to TQC
PA-280630 Permacel 99 Adhesion Tape direct replacement per ASTM D3359