|WOOD MOISTURE TESTER WITH TEMPERATURE COMPENSATION-LI9050||This instrument is a conductivity moisture meter specifically designed for the timber industry. The instrument has eight calibration scales, enabling the user to take accurate moisture measurements in 150 wood species. Moisture measurements can be taken using the integral pin electrodes, or using the heavy duty moisture probe. When used with the temperature probe, the moisture measurements are automatically corrected with respect to temperature. A calibration tester is integrated into the protective cap.||Download PDF||Link to TQC|
|KARSTEN TUBE PENETRATION TEST
The TQC Karsten Tube Penetration Test is a simple test for measuring the degree or water penetration into building materials such as concrete, stone and plaster. The test consists or a glass tube filled with water, bonded to the test material with plastiline. Water pressure is then exerted on the surface. A graduated scale indicates, over time, the amount or water penetrated into the surface.
The TQC Karsten Tube Penetration Test contains 3 tubes for horizontal surfaces, 3 tubes for vertical surfaces (or at choice any other combination of total 6 tubes), a water bottle, market and putty to place the tubes leak-tight on the surface. Additional vertical or horizontal tubes are available on request.
|Download spec sheet||Link to TQC|
|CAISSON V1D6 NON-DESTRUCTIVE WOOD MOISTURE DETECTION METER
|Non-destructive instrument for measuring moisture levels in wood. Measures up to a depth of approx. 20 mm. The instrument contains the calibration lines or 25 different types or wood, guaranteeing a high degree or accuracy. The selected wood type and the measuring results are immediately displayed. The instrument is also capable of detecting the moisture content of concrete, anhydrite, estrich, polyester, . Delivered incl. case.||Download spec sheet||Link to TQC|
|CONCRETE ENCOUNTER CONCRETE MOISTURE DETECTION METER LI9011||Non-destructive instrument for measuring moisture levels in concrete and sand-cement floors. Measurements or up to a few centimetres deep can be taken without damaging the surface. Ideal when laying parquet floors, floor coverings or floor coatings.
||Download spec sheet||Link to TQC|
|CARBIDE - METHOD HYGROMETER
|High precision destructive S2000 measuring system for detecting moisture in concrete, sand cement and other bricky material. The water present in the sample reacts (chemically) with calcium carbide. This produces pressure in the vessel, which is proportional to the residual moisture content. Insensitive to external influences, always displays the right value. Complete set in carrying case with balance, pressure cylinder, calcium carbide and cleaning tools.||Download spec sheet||Link to TQC|
| MOISTURE ENCOUNTER "PLUS"
Electronic moisture detector for locating damp under rooring felt. Ideal for detecting leaks in roofs or dry walls. Also suitable for providing indication or moisture levels in wood and construction materials.
Non-destructive method or detection. The Moisture Encounter PLUS incorporates the latest digital technology with analog read out and ease of use.
|Download brochure||Link to TQC|
|SKIPPER PLUS MOISTURE DETECTOR
Non-destructive moisture detector for locating damp in laminated plastics such as polyester, and in wood. Equipped with sort rubber electrodes, which absolutely do not damage the surface. Three moisture ranges for detecting moisture in both fresh and salt water.
Specially developed for osmosis-control and measuring or moisture before commencing with paint work on yachts.
|Download brochure||Link to TQC|
TQC Concrete moisture meter
|The TQC Concrete moisture meter is a non-destructive moisture meter for concrete. By means of measuring the electrical impedance the moisture content of concrete can easily be determined by just pressing the instrument against the concrete surface.||User manual||Link to TQC|
|Bradawl - stainless steel
|The TQC bradawl is extremely sturdy, with an ergonomically shaped grip. It's the perfect tool for inspecting dry rot in timber. Dry rot is not always visible, especially when water-based paints with high elasticity have been used. After measuring the wood content with a wood moisture meter, the places with over 20% of moisture can be tested for dry rot with the TQC bradawl.||Link to TQC|