Temperature

A tough, high-quality thermometer suitable for use with the interchangeable type 'K' thermocouple probes.

The practical design, robust casing, large push buttons and the protective holster supplied with the instrument make the TE1000 suitable for use in heavy-duty conditions. The large display panel enables readability at a distance.

Hotplate Stirrer with external temperature probe, support rod and clamp.

The ceramic coated hotplate has a high chemical/Acid resistance. The Jog-Shuttle switch
(Turn + Push) eases setting heat (up to 380°C), stirring speed (80-1500 RPM) and time. The illuminated display shows these values, and they can be stored in the memory of the TQC Hotplate Stirrer. The temperature is adjustable in 0,5°C steps., stirring speed in 5 RPM steps. TQC Hotplate Stirrer has a capacity of 20 liter.

The end of a run or probe failure is indicated with an acoustic signal. The TQC Hotplate Stirrer is protected against overheating and overload.

A user-friendly temperature meter for universal applications.
This robust instrument is designed to measure surface temperature without making contact under harsh industrial circumstances. The laser-sight identifies the target area while rubber parts on the housing protect the instrument against mechanical damage. An illuminated display allows working in dark or poorly lit environments.

Fast and simple operation, just point and shoot and the surface temperature is shown on the display within 500 mSec. Typical applications are with surfaces that are hard to reach, moving objects or electrical parts. It is used to measure parts in curing ovens, bearings, electrical junctions boxes, coolants, engines, plastic moulding, asphalt etc..

The laser pointer marks the target area and with the illuminated display it allows working in dark or poorly lit environments. The objects emission value is adjustable from 0.1 to 1.0, which results in a highly accurate measurement over the whole range.

Fast and simple operation, just point and shoot and the surface temperature is shown on the display within 500 mSec. Typical applications are with surfaces that are hard to reach, moving objects or electrical parts, parts in curing ovens, bearings, electrical junctions boxes, coolants, engines, plastic moulding, asphalt etc..

Digital thermo hygrometer for indoor use, to be used as benchtop or wall model.

Very large display (56 x 40 mm.), readable up to a distance of approximately 10 mtr. Memory for minimum and maximum values and humidity readings, toggle between °C/ °F; time display; alarm function.

The TQC Thermo hygrometer is a simple hand-held digital thermo/hygrometer. Temperature and air humidity are displayed simultaneously. Equipped with MIN/MAX memory, °C/°F selection, HOLD function and dewpoint indication.

The TQC Thermo hygrometer operates 10.000(!) hours on 3 batteries type AAA and switches itself off after 10 min.